Leached And Good Impact Resistance 1313 PDC Inserts For Oil Drilling
PDC cutters are produced from start to finish under the same roof and undergo a rigorous, but noninvasive inspection process, all in compliance with ISO 9001:2008 quality standards. In the field, they have been proven in a variety of drilling conditions on every continent on the planet.
Zzbetter offers three categories of PDC cutters:
High Impact Toughness PDC- Premium PDC cutters with excellent impact resistance and high abrasion resistance. These cutters are designed for tough, uneven drilling conditions, combining superior resistance to chipping and cracking with the abrasion resistance necessary to ensure a long cutter life.
High Abrasion Resistance PDC- Premium PDC cutters with excellent abrasion resistance and high impact resistance. These cutters are designed for drilling conditions, where high wear and cutter rounding are common.
General Purpose PDC- High-value, mid-range performance, general purpose PDC cutters with high impact resistance. These cutters are used in a wide variety of applications, including:
- -Oil and gas PDC bits as face, gauge, and backup cutters
- -PDC bits for geothermal drilling
- -PDC bits for water well drilling
- -PDC bits for directional drilling
- -Reaming tools
- -Core bits
- -Bearing elements
Specification sheet--Oil and Gas drilling PDC cutters
| Code | D ( mm) | H (mm) | Diamond Height (mm) | Diamond Chamfer (mm) | Carbide Chamfer (mm) |
| 1919 | 19.05±0.05 | 19.05±0.10 | 2.0-2.5 | 0.5x45° | 0.5x45° |
| 1916 | 19.05±0.05 | 16.0±0.10 | 2.0-2.5 | 0.5x45° | 0.5x45° |
| 1913 | 19.05±0.05 | 13.2±0.10 | 2.0-2.5 | 0.5x45° | 0.5x45° |
| 1616 | 15.88±0.05 | 16.0±0.10 | 2.0-2.5 | 0.3x45° | 0.5x45° |
| 1613 | 15.88±0.03 | 13.2±0.10 | 2.0-2.5 | 0.3x45° | 0.5x45° |
| 1610 | 15.88±0.03 | 10.0±0.10 | 2.0-2.5 | 0.3x45° | 0.5x45° |
| 1608 | 15.88±0.03 | 8.0±0.10 | 2.0-2.5 | 0.3x45° | 0.5x45° |
| 1313 | 13.44±0.03 | 13.2±0.10 | 2.0-2.5 | 0.3x45° | 0.5x45° |
| 1308 | 13.44±0.03 | 8.0±0.10 | 2.0-2.5 | 0.3x45° | 0.5x45° |
| 1010 | 10.00±0.03 | 10.0±0.10 | 2.0-2.5 | 0.3x45° | 0.5x45° |
| 1008 | 10.00±0.03 | 8.0±0.10 | 2.0-2.5 | 0.3x45° | 0.5x45° |
| 0810 | 8.00±0.03 | 10.0±0.10 | 2.0-2.5 | 0.3x45° | 0.5x45° |
| 0808 | 8.00±0.03 | 8.0±0.10 | 2.0-2.5 | 0.3x45° | 0.5x45° |
Spec sheet --Coal mining PDC cutters
| Code | D ( mm) | H (mm) | Diamond Height (mm) | Diamond Chamfer (mm) | Carbide Chamfer (mm) |
| 1308 | 13.44±0.03 | 8.0±0.10 | 2.0±0.2 | 0.3x45° | 0.5x45° |
| 1304 | 13.44±0.03 | 4.5±0.10 | 2.0±0.2 | 0.3x45° | 0.5x45° |
| 1008 | 10.00±0.03 | 8.0±0.10 | 2.0±0.2 | 0.3x45° | 0.5x45° |
| 1004 | 10.00±0.03 | 4.5±0.10 | 2.0±0.2 | 0.3x45° | 0.5x45° |
| 0810 | 8.00±0.03 | 10.0±0.10 | 2.0±0.2 | 0.3x45° | 0.5x45° |
| 0808 | 8.00±0.03 | 8.0±0.10 | 2.0±0.2 | 0.3x45° | 0.5x45° |
| 0804 | 8.00±0.03 | 4.5±0.10 | 2.0±0.2 | 0.3x45° | 0.5x45° |
We have strict quality control system for PDC cutters, the following lab tests and analysis to make sure every piece of product are perfect when reaching to customers' hand:
- 1. Wear Ratio Test
- 2. VTL Test
- 3. Impact Resistance Test(Side Impact)
- 4. Thermal Stability Test
Product Tags:
|
|
Leached And Good Impact Resistance Pcd Diamond Tools 1313 For Oil Drilling Images
|
